– Polyester
– Polyurethane
– Epoxy and hybrid powder
– Thermoplastic powder (PPA)
– Single and double coats
– Interior powder coating
– Exterior powder coating
– Façade-quality powder coating
– Mica
– Anti-graffiti coating
– Different gloss levels: glossy, satin or matte
– Different surfaces: smooth, fine texture or wrinkle
Coating process: To get a top-quality coating, you need an absolutely clean, smooth surface free of all residue. That means parts must be free of:
– Rust
– Silicone and grease
– Scale
– Paint or varnish
Quality begins with the pretreatment. At METDRA, this consists of:
– Cleaning
– Iron phosphating
– Rinsing
– Drying
Applying the powder: Small, mid-sized or large production runs are coated in a manual or fully automated powder coating booth using the tribo or corona method. The powder is negatively charged by an electrostatic gun while the metal part is positively charged. The powder adheres evenly to the workpiece, covering even hard-to-reach cavities.
This is a low-loss process in which excess powder is extracted with a recovery cyclone and is then filtered by a downstream unit. This maximizes resource efficiency and prevents powder from leaking out of the system into the rest of the building.
Street furniture
Phone: +49 7152 / 97930 – 41
aussenmoebel(at)metdra-kloz.de
Product presentation
Phone: +49 7152 / 97930 – 55
displays(at)metdra-kloz.de
Workpiece carriers
Phone: +49 7152 / 97930 – 56
werkstuecktraeger(at)metdra-kloz.de
Powder coating
Phone: +49 7152 / 97930 – 55
displays(at)metdra-kloz.de
Bent wire parts
Phone: +49 7152 / 97930 – 55
displays(at)metdra-kloz.de